close
close
close
Broach Tool - Non-Impact, PS10035 Port Serrations, for Material up to 40 HRC

NOTES: Unless Otherwise Specified
  • Usage of tool is described in TSB52273. This tool will broach serrations into most materials with hardness up to 40 HRC.
  • Two extra cutters are provided with each tool.
  • Replacement cutters may be purchased individually
  • Replacement studs may be purchased individually
  • Use of this tool will provide an allowable maximum runout of .009 between serration major diameter and controlled minor diameter (REF: PS10035) after broaching.
Request Information
Unit of Measure
Items
RFOPB5000HDB_primary

RFOPB5000HDB Broach Tool - Non-Impact
RFOPB5000HDB_primary

RFOPB5000HDB Broach Tool - Non-Impact
RFOPB5000HDB_primary

RFOPB5000HDB Broach Tool - Non-Impact
RFOPB5000HDB_primary

RFOPB5000HDB Broach Tool - Non-Impact
RFOPB5000HDB_primary

RFOPB5000HDB Broach Tool - Non-Impact
Cutter Number N/A RFOPB5002HDB5 N/A RFOPB5003HDB5 N/A RFOPB5004HDB5 N/A RFOPB5005HDB5 N/A RFOPB5006HDB5
Stud Nut Part Number N/A RFOPB5002HDB4 N/A RFOPB5003HDB4 N/A RFOPB5004HDB4 N/A RFOPB5005HDB4 N/A RFOPB5006HDB4
Thrust Bearing
Part Number 		N/A AXK0619TN N/A AXK0821TN N/A K81102TN N/A K81103TN N/A K81104TN
A Thread
MIL-S-8879
CLASS-3A 		N/A 0.2160-28 UNJF N/A 0.2500-28 UNJF N/A 0.3125-24 UNJF N/A 0.3750-24 UNJF N/A 0.4375-20 UNJF
B N/A 0.500 Inch N/A 0.625 Inch N/A 0.750 Inch N/A 0.750 Inch N/A 1.000 Inch
C N/A 0.125 Inch N/A 0.172 Inch N/A 0.218 Inch N/A 0.250 Inch N/A 0.312 Inch
D N/A 1.040 Inch N/A 1.140 Inch N/A 1.410 Inch N/A 1.530 Inch N/A 1.850 Inch
E N/A 3.100 Inch N/A 3.580 Inch N/A 3.860 Inch N/A 4.000 Inch N/A 4.710 Inch
To Produce
Serrations for
Port Number 		N/A PS10035-02 N/A PS10035-03 N/A PS10035-04 N/A PS10035-05 N/A PS10035-06