HowmetTitanium, 100° Tension Countersunk Head for Shear/Tension Composite Applications
Part Family |
N/A XPL |
Head Style |
N/A 100° Flush |
Type |
N/A Shear/Tension |
Application |
N/A Composite |
Pintail Configuration |
N/A Pull-In Pintail |
Material |
N/A 6Al-4V Titanium Alloy per AMS4967, 95KSI Minimum Shear Strength |
Finish Description |
N/A Phosphate fluoride treat per BAC5861, with red identification dye on pintail end plus cetyl alcohol lube per MIL-L-87132 |
Sealant Escape Groove |
N/A No |
Nominal Size |
N/A 0.4375 |
A Shank Dia
|
N/A 0.4365 |
(B) Theoretical Dia Nom |
N/A 0.8848 |
(C) Head Height Nom |
N/A 0.1881 |
G Gage Dia
|
N/A 0.7783 |
H Gage Height Max |
N/A 0.0471 |
H Gage Height Min |
N/A 0.0423 |
J Max |
N/A 0.022 |
(L) Ref |
N/A 0.370 |
M Max |
N/A 0.431 |
P Dia. Max |
N/A 0.431 |
R Rad
|
N/A 0.045 |
S |
N/A 0.0060 |
(T) Ref |
N/A 0.531 |
Shear/Tension Mating Collar Part Number |
N/A XBF-LV14 |
Minimum Double Shear Strength with XBF Collar, pounds |
N/A 28600 |
Minimum Ultimate Tensile Strength with XBF Collar, pounds |
N/A 13100 |
Typical Tensile Strength with XBF Collar, pounds |
N/A 13755 |
Pin Position Swage Gauge with XBF Collar |
N/A HG162-14 |
Minimum Grip Length Number |
N/A 7 |
Maximum Grip Length Number |
N/A 41 |
|
N/A The parentheses in the part number indicate the grip length number of the pin. The grip length number indicates the maximum design grip, in 1/16 inch increments. For example, XPL8BC-V14L09EPR has a maximum design grip length of 9/16 inch or .562 inches. The grip length number must be odd and between the minimum grip length number and the maximum grip length number. |
