close
close

Titanium, 100° Tension Countersunk Head for Shear/Tension Composite Applications

Part Family

N/A XPL

Head Style

N/A 100° Flush

Type

N/A Shear/Tension

Application

N/A Composite

Pintail Configuration

N/A Pull-In Pintail

Material

N/A 6Al-4V Titanium Alloy per AMS4967, 95KSI Minimum Shear Strength

Finish Description

N/A Powder Blasted Top Surface of Head plus cetyl alcohol lube per MIL-L-87132 (Ra 50/80 Surface Roughness)

Sealant Escape Groove

N/A No

Nominal Size

N/A 0.1640

A Shank Dia
+.0005
-.0000

N/A 0.1630

(B) Theoretical Dia Nom

N/A 0.3279

(C) Head Height Nom

N/A 0.0692

G Gage Dia
±.0001

N/A 0.2831

H Gage Height Max

N/A 0.0202

H Gage Height Min

N/A 0.0174

J Max

N/A 0.010

(L) Ref

N/A 0.124

M Max

N/A 0.156

P Dia. Max

N/A 0.156

R Rad
±.005

N/A 0.020

S

N/A 0.0045

(T) Ref

N/A 0.207

Shear/Tension Mating Collar Part Number

N/A XBF-LV05

Minimum Double Shear Strength with XBF Collar, pounds

N/A 4010

Minimum Ultimate Tensile Strength with XBF Collar, pounds

N/A 1700

Typical Tensile Strength with XBF Collar, pounds

N/A 1785

Pin Position Swage Gauge with XBF Collar

N/A HG162-05

Minimum Grip Length Number

N/A 9

Maximum Grip Length Number

N/A 35

N/A The parentheses in the part number indicate the grip length number of the pin. The grip length number indicates the maximum design grip, in 1/16 inch increments. For example, XPL8BC-V05L09PB has a maximum design grip length of 9/16 inch or .562 inches. The grip length number must be odd and between the minimum grip length number and the maximum grip length number.