HowmetTitanium, 100° Tension Countersunk Head for Shear/Tension Composite Applications
Part Family |
N/A XPL |
Head Style |
N/A 100° Flush |
Type |
N/A Shear/Tension |
Application |
N/A Composite |
Pintail Configuration |
N/A Pull-In Pintail |
Material |
N/A 6Al-4V Titanium Alloy per AMS4967, 95KSI Minimum Shear Strength |
Finish Description |
N/A Phosphate fluoride treat per AMS 2486 |
Sealant Escape Groove |
N/A Yes |
Nominal Size |
N/A 0.5000 |
A Shank Dia
|
N/A 0.4990 |
(B) Theoretical Dia Nom |
N/A 1.0105 |
(C) Head Height Nom |
N/A 0.2146 |
G Gage Dia
|
N/A 0.8901 |
H Gage Height Max |
N/A 0.0531 |
H Gage Height Min |
N/A 0.0479 |
J Max |
N/A 0.022 |
(L) Ref |
N/A 0.405 |
M Max |
N/A 0.492 |
P Dia. Max |
N/A 0.492 |
R Rad
|
N/A 0.045 |
S |
N/A 0.0060 |
(T) Ref |
N/A 0.623 |
Shear/Tension Mating Collar Part Number |
N/A XBF-LV16 |
Minimum Double Shear Strength with XBF Collar, pounds |
N/A 37300 |
Minimum Ultimate Tensile Strength with XBF Collar, pounds |
N/A 18000 |
Typical Tensile Strength with XBF Collar, pounds |
N/A 18900 |
Pin Position Swage Gauge with XBF Collar |
N/A HG162-16 |
Minimum Grip Length Number |
N/A 11 |
Maximum Grip Length Number |
N/A 41 |
|
N/A The parentheses in the part number indicate the grip length number of the pin. The grip length number indicates the maximum design grip, in 1/16 inch increments. For example, HXPL8BC-V16L15EP has a maximum design grip length of 15/16 inch or .938 inches. The grip length number must be odd and between the minimum grip length number and the maximum grip length number. |
