close
close

Titanium, Intermediate Protruding Head for Shear/Tension Composite Applications

Unit of Measure

Part Family

N/A XPL

Head Style

N/A Protruding

Type

N/A Shear/Tension

Application

N/A Composite

Pintail Configuration

N/A Removable Pintail

Material

N/A 6Al-4V Titanium Alloy per AMS4967, 95KSI Minimum Shear Strength

Finish Description

N/A Powder Blasted Top Surface of Head plus cetyl alcohol lube per MIL-L-87132 (Ra 50/80 Surface Roughness)

Sealant Escape Groove

N/A No

Nominal Size

N/A 0.5625

A Shank Dia
+.0005
-.0000

N/A 0.5610

B Head Dia
±.010

N/A 0.955

B' Flat Dia
±.010

N/A 0.674

C Head Height

N/A 0.171/0.161

(D) Ref

N/A 0.085

K Full Thread Depth Max

N/A 0.307

K1 Drill Depth Max

N/A 0.494

P Dia. Max

N/A 0.555

R Rad
±.005

N/A 0.035

S

N/A 0.0060

(T) Ref

N/A 0.811

Mating Collar Part Number

N/A XBF-LV18

Minimum Double Shear Strength, pounds

N/A 47200

Minimum Ultimate Tensile Strength, pounds

N/A 22500

Typical Tensile Strength, pounds

N/A 23625

Pin Position Swage Gauge

N/A HG162-18

Minimum Grip Length Number

N/A 7

Maximum Grip Length Number

N/A 49

Grip Range

N/A 1/8 in

Thread

N/A 0.2875-18 UNS-3B

N/A The parentheses in the part number indicate the grip length number of the pin. The grip length number indicates the maximum design grip, in 1/16 inch increments. For example, XPL8BP-V18-09PB has a maximum design grip length of 9/16 inch or .562 inches. The grip length number must be odd and between the minimum grip length number and the maximum grip length number.