HowmetTitanium, Intermediate Protruding Head for Shear/Tension Composite Applications
Part Family |
N/A XPL |
Head Style |
N/A Protruding |
Type |
N/A Shear/Tension |
Application |
N/A Composite |
Pintail Configuration |
N/A Pull-In Pintail |
Material |
N/A 6Al-4V Titanium Alloy per AMS4967, 95KSI Minimum Shear Strength |
Finish Description |
N/A Powder Blasted Top Surface of Head plus cetyl alcohol lube per MIL-L-87132 (Ra 50/80 Surface Roughness) |
Sealant Escape Groove |
N/A Yes |
Nominal Size |
N/A 0.3125 |
A Shank Dia
|
N/A 0.3115 |
B Head Dia
|
N/A 0.553 |
B' Flat Dia
|
N/A 0.374 |
C Head Height |
N/A 0.099/0.089 |
(D) Ref |
N/A 0.045 |
(L) Ref |
N/A 0.265 |
M Max |
N/A 0.306 |
P Dia. Max |
N/A 0.306 |
R Rad
|
N/A 0.025 |
S |
N/A 0.0045 |
(T) Ref |
N/A 0.369 |
Mating Collar Part Number |
N/A XBF-LV10 |
Minimum Double Shear Strength, pounds |
N/A 14600 |
Minimum Ultimate Tensile Strength, pounds |
N/A 6850 |
Typical Tensile Strength, pounds |
N/A 7192 |
Pin Position Swage Gauge |
N/A HG162-10 |
Minimum Grip Length Number |
N/A 11 |
Maximum Grip Length Number |
N/A 35 |
Grip Range |
N/A 1/8 in |
Y |
N/A 1.057 Inch |
|
N/A The parentheses in the part number indicate the grip length number of the pin. The grip length number indicates the maximum design grip, in 1/16 inch increments. For example, HXPL8BP-V10L15PB has a maximum design grip length of 15/16 inch or .938 inches. The grip length number must be odd and between the minimum grip length number and the maximum grip length number. |
