Howmet
Head Style |
N/A Protruding Tension |
Type |
N/A Tension |
Material |
N/A Nickel base alloy per AMS 5662 or AMS 5962. |
Finish and Lubricant |
N/A Aluminum Coat |
Nominal Diameter |
N/A 3/8 in |
Thread Size |
N/A 0.3750-24 UNJF-3A |
External Thread - Major Diameter |
N/A 0.3640-0.3680 in |
External Thread - Pitch Diameter |
N/A 0.344 in |
A |
N/A 0.565-0.600 in |
D |
N/A 0.3735-0.3745 in |
F |
N/A 0.075 in |
H |
N/A 0.130-0.140 in |
X |
N/A 0.005 in |
R |
N/A 0.020-0.030 in |
Chamfer |
N/A 3/64" x 45° |
E |
N/A 0.242 in |
J |
N/A 0.100 in |
G |
N/A 0.205 in |
W |
N/A 0.1582-0.1617 in |
T |
N/A 0.150-0.180 in |
Y |
N/A 0.207 in |
Minimum Double Shear, pounds |
N/A 27600.000 lb |
Tension Pounds Minimum |
N/A 19100.000 lb |
Notes |
N/A
1. Dimensions, unless otherwise noted: in inches: apply after finish. 2. Surface texture per ASME B46.1. 3. "A" concentric to "D" within 0.010 FIM. Runout of "D" to "Pitch" within "TOL X" when held on the "Pitch" of the complete threads nearest the shank and checked on the shank within one diameter of the thread runout. 4. Flute location ("K" dimension) and geometry are inspected per fairchild specification E106. 5. Threads must accept a AS8879 "GO" ring gage to assure free running nut capability. AS8879 limits do not apply to threads in the fluted portion of the threads, the minor and pitch diameters may be up to 0.004 below AS8879 minimum values and major diameter may be up to 0.002 below sheet 1 values for a distance equal to the flute length plus 1.5P Max. 6. Blended radius transition permits use in interference fit application. 7. See table I. 8. Pins shall be packaged or repackaged in clear sealed bags. Each bag shall marked with purchaser´s and manufacturer´s complete part number. Manufacturer´s lot number, manufacturer´s or distributor´s name and the pack date. 9. See sheet 6 for usage and applicability information. 10. For dimensions not shown, see sheets 1 and 2. 11. For material, finish and lube information, see sheets 1 and 2. 12. For dimensions not shown, see sheets 1 and 2. 13. For material and finish and lube information, see sheets 1 and 2. 14. See table V. |
