close
close
Unit of Measure

Specifications

Head Style

N/A Protruding Tension

Type

N/A Tension

Material

N/A 6AI-4V Titanium alloy per AMS 4928 or AMS 4967.

Finish and Lubricant

N/A Phosphate Fluoride

Nominal Diameter

N/A 3/16 in

Thread Size

N/A 0.1900-32 UNJF-3A

External Thread - Major Diameter

N/A 0.1810-0.1840 in

External Thread - Pitch Diameter

N/A 0.167 in

A

N/A 0.357-0.377 in

D

N/A 0.1890-0.1895 in

F

N/A 0.035 in

H

N/A 0.064-0.074 in

X

N/A 0.005 in

R

N/A 0.015-0.025 in

Chamfer

N/A 1/32" x 45°

E

N/A 0.120 in

J

N/A 0.075 in

G

N/A 0.140 in

W

N/A 0.0791-0.0806 in

T

N/A 0.070-0.100 in

Y

N/A 0.112 in

Minimum Double Shear, pounds

N/A 5380.000 lb

Tension Pounds Minimum

N/A 3180.000 lb

Notes

Notes

N/A 1. Dimensions, unless otherwise noted: in inches and apply after finish.
2. Surface texture per ANSI B46.1.
3. "A" concentric to "D" within 0.010 TIR. Runout of "D" to "Pitch" within "TOL X" when held on the "Pitch" of the complete threads. Nearest the shank and checked on the shank within one diameter of the thread runout.
4. Flute location ("K" dimension) and geometry are inspected per HFS specification E106.
5. Threads must accept a AS8879 "GO" ring gage to assure free running nut capability. AS8879 limits do not apply to threads in the fluted portion of the threads, the minor and pitch diameters may be up to 0.004 below AS8879 minimum values and major diameter may be up to 0.002 below sheet 1 values for a distance equal to the flute length plus 1.5P Max.
6. Blended radius transition permits use in interference fit application.
7. See table III.
8. Pins shall be packaged or repackaged in clear sealed bags. Each bag shall contain a maximum of 100 pins for 5 and 6 diameters, 50 pins per bag for 8 and 10 diameters, 25 pins per bag for 12 diameter. Each bag shall be marked with purchaser´s and manufacturer´s complete part number, manufacturer´s lot number, manufacturer´s or distributor´s name and the pack date.
9. See sheet 6 for usage and applicability information.
10. For dimensions not shown, see sheets 1 and 2.
11. For material, finish & lube information, see sheets 1 and 2.
12. For dimansions not shown, see sheets 1 and 2.
13. For material, finish and lube information, see sheets 1 and 2.
14. See table V.