close
close
Unit of Measure

Specifications

Head Style

N/A 100° Reduced Flush Shear

Type

N/A Shear

Material

N/A 6Al-4V Titanium alloy per AMS 4928 or AMS 4967.

Finish and Lubricant

N/A Phosphate Fluoride

Nominal Diameter

N/A 3/8 in

Thread Size

N/A 0.3750-24 UNJF-3A

External Thread - Major Diameter

N/A 0.3640-0.3680 in

External Thread - Pitch Diameter

N/A 0.344 in

A

N/A 0.592 in

A1

N/A 0.560 in

D

N/A 0.4052-0.4057 in

F

N/A 0.008 in

TOL X

N/A 0.005 in

H

N/A 0.076 in

M

N/A 0.0422-0.0450 in

R

N/A 0.030-0.040 in

R_CAD

N/A 0.030 in

Chamfer

N/A 3/64" x 45°

V

N/A 0.4852-0.4854 in

E

N/A 0.242 in

J

N/A 0.120 in

G

N/A 0.205 in

W

N/A 0.1582-0.1617 in

T

N/A 0.150-0.180 in

Y

N/A 0.207 in

Z

N/A 0.015 in

Minimum Double Shear, pounds

N/A 24600.000 lb

Tension Pounds Minimum

N/A 7200.000 lb

Notes

Notes

N/A 1. Dimensions, unless otherwise noted: in inches; apply after finish.
2. Surface texture per ASME B46.1.
3. Conical surface of head to be concentric to "D" within 0.004 FIM.
4. "A1" is concentric to "D" within "F" FIM. Runout of "D" to "Pitch" within "Tol. X" when held on the "Pitch" of the complete threads nearest the shank and checked on the shank within one diameter of the thread runout.
5. Blended radius transition permits use in interference fit application.
6. Curved or flat edge manufacturer´s option.
7. Flute location ("K" dimension) and geometry are inspected per HFS specification E106.
8. Threads must accept a AS8879 "GO" ring gage to assure free running nut capability. AS8879 limits do not apply to threads in the fluted portion of the thread, the minor and pitch diameters may be up to 0.004 below AS8879 minimum values and major diameter may be up to 0.002 below sheet 1 values for a distance equal to the flute length plus 1.5P Max.
9. See table III.
10. Pins shall be packaged or repackaged in clear sealed bags. Each bag shall be marked with the purchaser´s and manufacturer´s complete part number. Manufacturer´s lot number, manufacturer´s or distributor´s name and the pack date.
11. See sheet 6 for usage and inactivation applicability information.
12. For dimensions not shown, see sheets 1 and 2.
13. For material, finish and lube information, see sheets 1 and 2.