A |
N/A 0.532-0.542 in |
B |
N/A 0.330-0.338 in |
C |
N/A 0.435 in |
D |
N/A 0.390 in |
L - MAX |
N/A 0.435 in |
M - MAX |
N/A 0.390 in |
X |
N/A 0.104 in |
Drive Tool Dash No. |
N/A -10 |
Axial Tensile Strength lbf Min |
N/A 6300.000 lb |
Thread per AS8879 |
N/A 0.3125-24 UNJF-3B |
Material |
N/A Titanium |
Heat Treat |
N/A per AMS-H-81200 |
Finish |
N/A Coat outside of nut (Threads & C´bore optional) with dry film lubricant per AS5272, Type 1, plus (optional) cetyl alcohol lubricant. |
Performance |
N/A ENSI312, Except as follows: A) Free running torque for EN1182ND-5 & NDU5 to be 4 ozf-in maximum |
Nominal Stud Nut Size |
N/A 5/16-24 |
Color identification |
N/A No paint |
Notes |
N/A
1. Dimensions to be met after finish, but before lubrication.
2. Color identification: EN1182ND(*): Nuts are identified with white paint within lobe area as shown. All three lobes shall be completely covered with paint on a minimum of 95% og the obe area of each part. Overspray permitted on exterior surfaces. EN1182NDU(*): "No paint". 3. All EDDIE-NUTS™ must be installed using an appropriate DELTA-RAD™ EDDIE-BOLT® installation tool. 4. Nuts shall be packaged in clear, sealed, plastic bags. Each bag shall contain a maximum of 100 nuts per diameter. Each bag shall be marked with "EDDIE-NUTS™", Purchaser´s and Manufacturer´s complete part number, Manufacturer´s lot number, Manufacturer´s name and the "PACK" date. |